logo
продукты
Подробная информация о продукции
Дом > продукты >
150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion

150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion

МОК: 300
Цена: $65.50-68.50
Подробная информация
Место происхождения
Гуандун, Китай
Номер модели
S10A
Канал:
2 (2,0)
Выходная мощность:
150 Вт
Частотная характеристика:
25-200 Гц
Общее гармоническое искажение:
<1%
Отношение сигнал-шум:
>95dB
Чувствительность входного сигнала:
180 мВ
Встроенная фаза:
Переключаемый 0°/180°
Встроенный режим ожидания:
ВКЛ/АВТО Переключаемый
Время автоматического отключения:
15 минут
Автоматическое включение чувствительности:
5 mV
Потребление энергии в режиме ожидания:
Низкая, чем 0,5 Вт
Входная мощность:
110–240 В переменного тока
Размеры:
215*180*3,0 мм
Контроль низких частот:
Переменная
Защита:
Выход Короткое замыкание, перегрузка и перегрев
Выделить:

150W Output Power Plate Amplifier

,

25-200 Hz Frequency Response Subwoofer Plate Amplifier

,

<1% Total Harmonic Distortion Class D Subwoofer Amplifier

Характер продукции
Wholesale Streaming Audio Plate Amplifier Board Class D Subwoofer
Product Features
  • Auto Power on/off select circuitry
  • Switching power supply for excellent efficiency
  • Switchable 110/230V power voltage
  • Selectable 0°-180° phase adjustment
  • Standby On/Auto mode options
  • Variable gain level control
  • Phase 0°/180° select switch & low pass variable control
  • RCA input terminal
  • Input Power AC110V - 240V
  • Protection against output short, overloads & over temperature
  • Power & protect indicators
Technical Specifications
Product Name S10A CLASS D Subwoofer Plate Amplifier
Output Power 150W
Frequency Response 25-200 Hz
Total Harmonic Distortion <1%
Signal to Noise Ratio >95dB
Input Sensitivity 180mV
Built-in Phase 0°/180° Switchable
Built-in Standby Mode ON / AUTO Switchable
Auto Off time 15 mins
Auto On Sensitivity 5 mV
Standby Power Consumption Lower than 0.5W
Dimensions (W × H × D) 215 × 180 × 3.0 mm
Product Images
150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 0 150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 1 150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 2 150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 3 150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 4 150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 5
Packing & Delivery

Product package: Normally we package products as follows: Product in PE bag → Gift box or inner carton with EPE inside → Outer carton. We can design different package styles with your logo and shipping mark printing.

Shipping options:

  • Samples: Shipped by international express (FEDEX, DHL, UPS, etc.)
  • Mass production: Shipped by sea (FCL, LCL) or air transportation
150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 6
Certifications

Vistron Audio prioritizes quality and maintains necessary product and factory management certificates:

Product Certifications:

  • EU Market: CE (EMC, LVD, RF, ErP), Rohs, REACH
  • US Market: UL, FCC, ETL, NRTL
  • Other Markets: CB, CCC, PSE, KC, VDE, BSI, IC

Company Certification: ISO9001:2015 certified factory management and quality system.

150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 7
Company Profile

Established in 1998, Vistron Audio has over 20 years of experience in research, design, manufacturing, and marketing of audio products, specializing in:

  • Power amplifiers (wireless audio, subwoofer, amplifier plates)
  • Speakers (WiFi/Bluetooth, active/passive, subwoofers, sound bars)
  • Wireless audio (DAB, WiFi amplifiers, streamers)
  • DJ equipment (mixers, CD players, Midi controllers)

With 200+ employees and 6000m² facility, we offer strong R&D capabilities, SMT production lines, strict QC standards, and comprehensive OEM/ODM services for 100+ global brands.

150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 8
Frequently Asked Questions
How to process an order? What about prices?
Please send an inquiry or contact us online. We will reply with prices and information or a catalog with full prices.
Can I get samples?
We provide samples for testing before placing orders.
Can I have my logo printed on products and packaging?
Yes, we offer comprehensive OEM services including custom branding.
Can you produce custom products based on my specifications?
Yes, our experienced engineers can design products to your exact requirements through our ODM service.
What are your payment terms?
Samples: T/T, Paypal, Western Union. Production: T/T, L/C, or negotiable terms.
What is your delivery time?
Typically 35-40 days after order confirmation, negotiable case by case.
продукты
Подробная информация о продукции
150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion
МОК: 300
Цена: $65.50-68.50
Подробная информация
Место происхождения
Гуандун, Китай
Номер модели
S10A
Канал:
2 (2,0)
Выходная мощность:
150 Вт
Частотная характеристика:
25-200 Гц
Общее гармоническое искажение:
<1%
Отношение сигнал-шум:
>95dB
Чувствительность входного сигнала:
180 мВ
Встроенная фаза:
Переключаемый 0°/180°
Встроенный режим ожидания:
ВКЛ/АВТО Переключаемый
Время автоматического отключения:
15 минут
Автоматическое включение чувствительности:
5 mV
Потребление энергии в режиме ожидания:
Низкая, чем 0,5 Вт
Входная мощность:
110–240 В переменного тока
Размеры:
215*180*3,0 мм
Контроль низких частот:
Переменная
Защита:
Выход Короткое замыкание, перегрузка и перегрев
Количество мин заказа:
300
Цена:
$65.50-68.50
Выделить

150W Output Power Plate Amplifier

,

25-200 Hz Frequency Response Subwoofer Plate Amplifier

,

<1% Total Harmonic Distortion Class D Subwoofer Amplifier

Характер продукции
Wholesale Streaming Audio Plate Amplifier Board Class D Subwoofer
Product Features
  • Auto Power on/off select circuitry
  • Switching power supply for excellent efficiency
  • Switchable 110/230V power voltage
  • Selectable 0°-180° phase adjustment
  • Standby On/Auto mode options
  • Variable gain level control
  • Phase 0°/180° select switch & low pass variable control
  • RCA input terminal
  • Input Power AC110V - 240V
  • Protection against output short, overloads & over temperature
  • Power & protect indicators
Technical Specifications
Product Name S10A CLASS D Subwoofer Plate Amplifier
Output Power 150W
Frequency Response 25-200 Hz
Total Harmonic Distortion <1%
Signal to Noise Ratio >95dB
Input Sensitivity 180mV
Built-in Phase 0°/180° Switchable
Built-in Standby Mode ON / AUTO Switchable
Auto Off time 15 mins
Auto On Sensitivity 5 mV
Standby Power Consumption Lower than 0.5W
Dimensions (W × H × D) 215 × 180 × 3.0 mm
Product Images
150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 0 150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 1 150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 2 150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 3 150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 4 150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 5
Packing & Delivery

Product package: Normally we package products as follows: Product in PE bag → Gift box or inner carton with EPE inside → Outer carton. We can design different package styles with your logo and shipping mark printing.

Shipping options:

  • Samples: Shipped by international express (FEDEX, DHL, UPS, etc.)
  • Mass production: Shipped by sea (FCL, LCL) or air transportation
150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 6
Certifications

Vistron Audio prioritizes quality and maintains necessary product and factory management certificates:

Product Certifications:

  • EU Market: CE (EMC, LVD, RF, ErP), Rohs, REACH
  • US Market: UL, FCC, ETL, NRTL
  • Other Markets: CB, CCC, PSE, KC, VDE, BSI, IC

Company Certification: ISO9001:2015 certified factory management and quality system.

150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 7
Company Profile

Established in 1998, Vistron Audio has over 20 years of experience in research, design, manufacturing, and marketing of audio products, specializing in:

  • Power amplifiers (wireless audio, subwoofer, amplifier plates)
  • Speakers (WiFi/Bluetooth, active/passive, subwoofers, sound bars)
  • Wireless audio (DAB, WiFi amplifiers, streamers)
  • DJ equipment (mixers, CD players, Midi controllers)

With 200+ employees and 6000m² facility, we offer strong R&D capabilities, SMT production lines, strict QC standards, and comprehensive OEM/ODM services for 100+ global brands.

150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion 8
Frequently Asked Questions
How to process an order? What about prices?
Please send an inquiry or contact us online. We will reply with prices and information or a catalog with full prices.
Can I get samples?
We provide samples for testing before placing orders.
Can I have my logo printed on products and packaging?
Yes, we offer comprehensive OEM services including custom branding.
Can you produce custom products based on my specifications?
Yes, our experienced engineers can design products to your exact requirements through our ODM service.
What are your payment terms?
Samples: T/T, Paypal, Western Union. Production: T/T, L/C, or negotiable terms.
What is your delivery time?
Typically 35-40 days after order confirmation, negotiable case by case.