Подробная информация о продукции

Дом > продукты >

Professional 4Ohm 1000W Theater Audiophile Mono Plate Power Amplifier with Balanced XLR and RCA

продукты

Мощный усилитель звуковой частоты

Professional 4Ohm 1000W Theater Audiophile Mono Plate Power Amplifier with Balanced XLR and RCA

МОК:	300
Цена:	$120.85-129.80

Подробная информация

Характер продукции

Подробная информация

Место происхождения

Гуандун, Китай

Номер модели

SUB-1000T

Выходная мощность:

Среднеквадратичное значение при 4 Ом, 1000 Вт

Частотная характеристика:

25-200 Гц

Общее гармоническое искажение:

Отношение сигнал-шум:

> 90db

Чувствительность входного сигнала:

120 мВ

Время автоматического отключения:

15 минут

Автоматическое включение чувствительности:

Потребление энергии в режиме ожидания:

Низкая, чем 0,5 Вт

Рабочее напряжение:

Выбрано 110 В/230 В переменного тока

Размеры:

309,8*254*140 мм

Тип ввода:

Балансный XLR, небалансный RCA

Вывод типа:

Балансный XLR, небалансный RCA

Встроенная фаза:

0°-180° Переключаемый

Встроенный режим ожидания:

ВКЛ/ВЫКЛ/АВТО Переключаемый

Особенности защиты:

Короткое замыкание, перегрев, перегрузка по току, перегрузка

Выделить:

4Ohm Plate Power Amplifier

Theater Audiophile Subwoofer Amplifier Board

Professional Mono Plate Amplifier

Характер продукции

Wholesale High Power 4Ohm 1000W Theater Audiophile Subwoofer Amplifier Board Mono Plate Amplifier

Product Description

Professional-grade mono plate amplifier designed for high-performance subwoofer applications in theater and audiophile systems.

Key Features

MIGHT MODE for powerful bass performance
AUTO POWER ON/OFF with signal input detection
PARAMETRIC EQUALIZER with numerous frequency adjustment options
MEMORY RECALL function for preset configurations
MUTE CONTROL FUNCTION for convenient operation

Technical Specifications

Product Name	DSA-1000 subwoofer plate amplifier
Output Power	RMS@4Ohm 1000W
Frequency Response	25-200 Hz
Total Harmonic Distortion	<1%
Signal to Noise Ratio	>90dB
Input	Balanced XLR, Unbalanced RCA
Output	Balanced XLR, Unbalanced RCA
Input Sensitivity	120mV
Built-in Phase	0°-180° Switchable
Built-in Standby Mode	ON / OFF / AUTO Switchable
Auto Off time	15 mins
Auto On Sensitivity	5 mV
Standby Power Consumption	Low than 0.5W
Protection	Short, Over-heat, Over-current, Over-load
Working Voltage	110V / 230V AC Selected
Dimensions (W X H X D)	309.8254140 mm

Product Images

Packing & Delivery

Product package: Normally we package products in PE bag -- Gift box or inner carton with EPE inside -- Outer carton. We can design custom packaging with your logo and shipping mark.

Shipping options:

Samples: Shipped via international express (FEDEX, DHL, UPS)
Mass production: Shipped by sea (FCL, LCL) or air transportation

Certifications

Vistron Audio maintains strict quality standards with comprehensive certifications:

Product Certifications:

EU Market: CE (EMC, LVD, RF, ErP), Rohs, REACH
US Market: UL, FCC, ETL, NRTL
Other Markets: CB, CCC, PSE, KC, VDE, BSI, IC

Company Certification: ISO9001:2015 for quality management systems.

Company Profile

Established in 1998, Vistron Audio specializes in audio product research, design, manufacturing, and engineering services with over 20 years of experience.

Product Range:

Power amplifiers (wireless, subwoofer, amplifier plates)
Speakers (WiFi/Bluetooth, active/passive, subwoofers, sound bars)
Wireless audio systems (DAB, WiFi amplifiers, streamers)
DJ equipment (mixers, CD players, MIDI controllers)

With 200+ employees and 6000 sqm facility, we offer strong R&D capabilities, SMT production lines, and strict QC standards. We specialize in OEM/ODM services for over 100 global brands.

Frequently Asked Questions

Q: How to process an order? What about prices?

A: Please send an inquiry or contact us online for pricing and product information.

Q: Can I get samples?

A: We provide samples for testing before order placement.

Q: Can I have my logo printed on products and packaging?

A: Yes, we offer comprehensive OEM services including custom branding.

Q: Can you produce custom products based on my specifications?

A: Yes, our experienced engineers can develop products to your exact requirements.

Q: What are your payment terms?

A: Samples: T/T, Paypal, Western Union. Production: T/T, L/C, or negotiable terms.

Q: What is your delivery time?

A: Typically 35-40 days after order confirmation, negotiable case by case.

Тэги:

Модуль AMP субвуфера,

Усилитель звука,

Усилитель громкоговорителя

Рекомендуемые продукты

150W 2 Channel Subwoofer Plate Power Amplifier with 25-200 Hz Frequency Response and Class D Technology

Контакт теперь

100W Output Power Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and Built-in Phase 0°/180° Switchable

Контакт теперь

100W Output Power Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion

Контакт теперь

250W CLASS D Subwoofer Plate Amplifier with Built-in Phase Switchable and Standby Mode for Professional Audio Systems

Контакт теперь

250W Output Power 20-200 Hz Frequency Response Subwoofer Plate Amplifier with 0°/180° Phase Switchable

Контакт теперь

Professional 250W Class D Subwoofer Plate Amplifier with 20-200 Hz Frequency Response and <1% Total Harmonic Distortion

Контакт теперь

150W Output Power Class D Subwoofer Plate Amplifier with 25-200 Hz Frequency Response and <1% Total Harmonic Distortion

Контакт теперь

Подробная информация о продукции

продукты

Мощный усилитель звуковой частоты

Домашний аудиоусилитель

Беспроводный аудиоусилитель

Многоканальные усилители

усилитель сабвуфера

Усилитель мощности пластинки

диктор книжных полков

Спикер для монитора студии

Громкоговоритель

HiFi CD-плеер

Аудиокомплекты

Специальные аудиосервисы

Professional 4Ohm 1000W Theater Audiophile Mono Plate Power Amplifier with Balanced XLR and RCA

МОК:	300
Цена:	$120.85-129.80

Подробная информация

Характер продукции

Подробная информация

Место происхождения

Гуандун, Китай

Номер модели

SUB-1000T

Выходная мощность:

Среднеквадратичное значение при 4 Ом, 1000 Вт

Частотная характеристика:

25-200 Гц

Общее гармоническое искажение:

<1%

Отношение сигнал-шум:

> 90db

Чувствительность входного сигнала:

120 мВ

Время автоматического отключения:

15 минут

Автоматическое включение чувствительности:

5 mV

Потребление энергии в режиме ожидания:

Низкая, чем 0,5 Вт

Рабочее напряжение:

Выбрано 110 В/230 В переменного тока

Размеры:

309,8*254*140 мм

Тип ввода:

Балансный XLR, небалансный RCA

Вывод типа:

Балансный XLR, небалансный RCA

Встроенная фаза:

0°-180° Переключаемый

Встроенный режим ожидания:

ВКЛ/ВЫКЛ/АВТО Переключаемый

Особенности защиты:

Короткое замыкание, перегрев, перегрузка по току, перегрузка

Количество мин заказа:

300

Цена:

$120.85-129.80

Выделить

4Ohm Plate Power Amplifier

Theater Audiophile Subwoofer Amplifier Board

Professional Mono Plate Amplifier

Характер продукции

Wholesale High Power 4Ohm 1000W Theater Audiophile Subwoofer Amplifier Board Mono Plate Amplifier

Product Description

Professional-grade mono plate amplifier designed for high-performance subwoofer applications in theater and audiophile systems.

Key Features

MIGHT MODE for powerful bass performance
AUTO POWER ON/OFF with signal input detection
PARAMETRIC EQUALIZER with numerous frequency adjustment options
MEMORY RECALL function for preset configurations
MUTE CONTROL FUNCTION for convenient operation

Technical Specifications

Product Name	DSA-1000 subwoofer plate amplifier
Output Power	RMS@4Ohm 1000W
Frequency Response	25-200 Hz
Total Harmonic Distortion	<1%
Signal to Noise Ratio	>90dB
Input	Balanced XLR, Unbalanced RCA
Output	Balanced XLR, Unbalanced RCA
Input Sensitivity	120mV
Built-in Phase	0°-180° Switchable
Built-in Standby Mode	ON / OFF / AUTO Switchable
Auto Off time	15 mins
Auto On Sensitivity	5 mV
Standby Power Consumption	Low than 0.5W
Protection	Short, Over-heat, Over-current, Over-load
Working Voltage	110V / 230V AC Selected
Dimensions (W X H X D)	309.8254140 mm

Product Images

Packing & Delivery

Product package: Normally we package products in PE bag -- Gift box or inner carton with EPE inside -- Outer carton. We can design custom packaging with your logo and shipping mark.

Shipping options:

Samples: Shipped via international express (FEDEX, DHL, UPS)
Mass production: Shipped by sea (FCL, LCL) or air transportation

Certifications

Vistron Audio maintains strict quality standards with comprehensive certifications:

Product Certifications:

EU Market: CE (EMC, LVD, RF, ErP), Rohs, REACH
US Market: UL, FCC, ETL, NRTL
Other Markets: CB, CCC, PSE, KC, VDE, BSI, IC

Company Certification: ISO9001:2015 for quality management systems.

Company Profile

Established in 1998, Vistron Audio specializes in audio product research, design, manufacturing, and engineering services with over 20 years of experience.

Product Range:

Power amplifiers (wireless, subwoofer, amplifier plates)
Speakers (WiFi/Bluetooth, active/passive, subwoofers, sound bars)
Wireless audio systems (DAB, WiFi amplifiers, streamers)
DJ equipment (mixers, CD players, MIDI controllers)

With 200+ employees and 6000 sqm facility, we offer strong R&D capabilities, SMT production lines, and strict QC standards. We specialize in OEM/ODM services for over 100 global brands.

Frequently Asked Questions

Q: How to process an order? What about prices?

A: Please send an inquiry or contact us online for pricing and product information.

Q: Can I get samples?

A: We provide samples for testing before order placement.

Q: Can I have my logo printed on products and packaging?

A: Yes, we offer comprehensive OEM services including custom branding.

Q: Can you produce custom products based on my specifications?

A: Yes, our experienced engineers can develop products to your exact requirements.

Q: What are your payment terms?

A: Samples: T/T, Paypal, Western Union. Production: T/T, L/C, or negotiable terms.

Q: What is your delivery time?

A: Typically 35-40 days after order confirmation, negotiable case by case.

Тэги: